Sand blasting or more correctly abrasive blasting is the king of surface preparation. Its speed and effectiveness to remove rust, scale, ad old coatings is unmatched by any other method if done right.

In recent years environmental and operator health concerns has changed and the industry had developed much more “friendly” blast media solution such as crushed glass and walnut shells.
When it comes to properly coating metal a proper profile on the substrate if critical and our blasters will give you that.
Proper prep=coating life

Mobile Sand/Water Blasting,
NACE & Plural Component Certified
Call today for an estimate
416 444-5092

This project consisted of a 5000psi high pressure wash to remove all loose material and chaulking as the surface prep. The coating system is a Bonding primer and 2 coats of a 100% acrylic coating.

This project consisted of a 5000psi high pressure wash to remove all loose material and chaulking as the surface prep. The coating system is a Bonding primer and 2 coats of a 100% acrylic coating.

This project had it all. Vast heavily rusted areas where sand blasted to a commercial blast while others prepped with high pressure power washing. The entire structure was then primed with a single component rust inhibitive primer followed by a high buil

This project had it all. Vast heavily rusted areas where sand blasted to a commercial blast while others prepped with high pressure power washing. The entire structure was then primed with a single component rust inhibitive primer followed by a high buil

FREE Consultation: 416.444.5092